Mobile Device Vent Mount from Bimmian

Product Introduction

Conveniently mount your mobile device where you can see it using a vent clip mount, or stick it to your dash trim as an alternative mounting solution.

Features and Benefits Of This Product

This unique holder give you a lightweight option for phones up to 2 3/4 wide. This holder will fit devices like the iPhone 4, 5 (all models) and 6 plus (with a very thin phone case). It will not fit the iPhone 6 plus or similar sized phones. For large phones, including the iPhone 6 plus, see our Mobile Dash Mount.

This device holder is made from strong tinted plastic that can rotate from vertical to horizontal orientation with the flick of the wrist.

Available Options

This kit gives you two mounting options:

Vent mounting: Mount on any vent in your vehicle, mount even two of them (one for your passenger!) and also mount on rear vents for your rear passenger. Comes with two lengths of vent mounting clips depending on how you want to mount it or your vent angle.

Trim mounting: Optionally mount the device holder to your trim. This holder comes with "wings" that mount between the plate and holder to give you a surface to stick, even on curves. An optional foam pad to protect your trim from the holder plate is available.

Installation Notes

Make sure to clean the application area and wings with alcohol to promote adhesion. This will be essential to make a secure mount. Textured trim may not be able to hold the device holder effectively. Your only option may be the vent clip mount.

PLEASE NOTE: Depending on your trim surface and the finish on it, the glue may or may not discolor it after a long time. Most trims should not have this issue.

Take care when mounting your device to the holder (spreading the holder) as to not accidentally dislodge the protective foam pads on one of the tabs.

CAUTION: When installing the vent clips we recommend trying the two lengths before setting them into the base. Then when you are happy with the placement slide the holder over top.
Be sure to put the plate onto the vent clips in a way that makes the holder slide onto it downward and as to not slide off if spread open. You don't want to accidentally have the holder slide off when you go over a bump. Installation Difficulty: SIMPLE (No Tools, Anyone Can Install)

Complimentary or Alternate Products

Mobile Dash MountCD Slot Phone HoldersMechunik Mini Cargo Storage NetBMW Series Key Ring

This Product Fits
(See PRICES & ORDERING tab above for clearer detail)

Warranty + Satisfaction Guarantee

Order with confidence! If you are not completely satisfied with your purchase, you may return it for exchange or refund. This product carries a 1 year manufacturers warranty. See our terms of sale for full details.

Notes / Warnings

CAUTION: When installing the vent clips we recommend trying the two lengths before setting them into the base. Then when you are happy with the placement slide the holder over top.
Be sure to put the plate onto the vent clips in a way that makes the holder slide onto it downward and as to not slide off if spread open. You don't want to accidentally have the holder slide off when you go over a bump.

Just a note that the plastic clips holding onto your vent in the vent install option may move back and forth and create minor wear marks on the vent from normal use. To prevent this you may want to ad some padding (not provided).

Please check your local laws for ensure legality when using this product on public roads and highways. In areas where this product is not legal for road use it is sold strictly for off-road, track or show use only.