Mobile Dash Mount from Bimmian
Mount your phone or other device securely and in the optimal position to offer the driver the best visibility and convenience. Optional accessories allow you to configure the system that best suits your needs.
Features and Benefits Of This Product
The Mechunik Mobile Dash Mount System features a custom BMW model specific bracket mount, a Mechunik ball mounting plate, 2 premium Mechunik device holders, a Mechunik table top tripod and a device tilt angle adaptor. (all sold separately or as a kit discount). You build the system based on your needs.
Custom Vehicle Bracket Mount
The custom vehicle mounts add convenience with a factory-like appearance to your interior, without obstruction of instrumentation or modifying your dashboard in any way.
Our mobile holders are the easiest, cleanest and most secure way to mount your mobile devices! No gluing or clipping to vents, no drilling, suction cups or any type of permanent visible dashboard modification. This is key to what makes our mounts so desirable!
On a few models, the bracket must be screwed to the dash under the dash trim. However, if the dash mount is removed and trim replaced, the holes are not visible.
The main concept of this product is to create a secure and accessible way to mount and operate a mobile phone, iPod/MP3 Player, satellite radio or GPS unit, much like they would the controls on a car radio. The device faces the driver directly, allowing proper visibility of the display. Our mounts are made of a unique high-carbon mild steel, have great strength-to-weight ratio and are finished with a black powder coat to fit in perfectly with your vehicle's interior.
Once mounted, depending on the device, it can either be secured directly to our mount, or one of our optional premium Mechnunik device holders can be fitted to the mount using the optional mounting plate. With the vehicle bracket mount, mounting plate and device holder, you'll have the ultimate mobile solution for BMWs.
Mechunik Aluminum Mounting Plate (13mm ball)
Made from high strength aircraft aluminum and anodized black for a matching finish, this mount fits onto the Panavise Custom Vehicle Mount with 4 screws. It is fitted with a custom size 13mm ball that allows you to mount one of Mechanics two premium device holders.
Mechunik Device Holder
The Mechunik device holders are available in 2 styles: SLIM and STURDY and each adjusts to fit phones up to 3.5", fitting some of the largest smart phones on the market today including the iPhone 6s Plus with a case.
These mounts allows you to plug cables into either the top or bottom of your device, as well as providing access along the side at specific points.
The final install has the mobile unit angled to the drivers line of sight, without obstructing any instrumentation and does not impede access to the glove box.
Mechunik Desktop 6" Tripod
This little tripod is excellent for desktop use, kitchen countertops, workshops and more. It uses the same 13mm ball allowing you to transfer your holder form your BMW or to use a second holder to keep your phone at your fingertips and with the screen in view. Use the amazing Mechunik device holder in your home for FaceTime, watch videos, or even text, its that sturdy.
Also great for having at your side while you work on a garage floor. With flexible 6 inch legs, this holder allows you to adjust height, angle and stability based on the phone you are using. Each leg is individually flexible.
Tilt Angle Adaptor
The Mechunik device holder already rotates on the ball mount allowing you to angle it in many way not possible with other holders, but if you need a little more distance from the bracket or to even more angling flexibility then this adaptor is an excellent option that mounts between your vehicle bracket and the device mount.
We recommend installing the bracket to the vehicle first, then adding the components onto the bracket Installation Difficulty: BASIC (Simple Tools, No Special Knowledge Required)
Complimentary or Alternate Products
This Product Fits
(See PRICES & ORDERING tab above for clearer detail)
Warranty + Satisfaction Guarantee
Order with confidence! If you are not completely satisfied with your purchase, you may return it for exchange or refund. This product carries a 1 year manufacturers warranty. See our terms of sale for full details.
Notes / Warnings
This item is available for left hand drive vehicles only.
This product is not intended to be used by the driver of the vehicle while driving.
All trademarks used on this page are the property of their respective orders and are shown for compatibility purposes only and does not represent any form of authorization or endorsement by the respective trademark owners.
Please check your local laws for ensure legality when using this product on public roads and highways. In areas where this product is not legal for road use it is sold strictly for off-road, track or show use only.
(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Ayan | (Nepean, Ontario)
Excellent product, very sturdy and secure. Angle is great for viewing and access from drivers seat, although position high up on dash and angle can be a problem in a convertible with the top down.(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Joey | (Toronto, ON)
excellent service(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Joey | (Toronto, ON)
very fast(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Junquan | (Windsor, Ontario)
Perfect combo! Match the original interior perfectly. Really easy to install. Only need a flat head screwdriver and a cross head screwdriver. The shipping is lightening speed too. Will come back again. Thanks Bimmian.(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Chris | (Richmond Hill, Ontario)
Fits like a charm and looks great. Just as I expected it to be.(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Chris | (Richmond Hill, Ontario)
great device holder, convenient and works just as said.(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Kevin | (Lake Oswego, OR)
This mount is great. Fits perfectly and it set at a perfect angle. Quality is excellent. If your looking for a mount for cell, gps, or whatever this is the one you want!(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Wesley | (Candiac, Quebec)
Received product in perfect condition. Easy installation. Fits and suits car really good. Only problem is I have the new Samsung Galaxy S3 which is a fairly big phone (screen 4.8 inches), whch fits quite comfortably however is a bit of a struggle to get in with a case around the phone. I was expecting this anyways, as the dimensions of fittment are on the site. Great product, however I was missing the two screws required for installation. But im sure this is not a frequent problem. Id definately purchase again! Thx Bimmian!(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Sayasith | (Windsor, Ontario)
nice and easy add on
Mobile Device Vent Mount
Conveniently mount your mobile device where you can see it using a vent clip mount.
CD Slot Phone Holders
A convenient place to mount your smartphone or GPS. Secures into the unused CD slot of your stereo for ultimate convenience.
Mechunik Mini Cargo Storage Net
Store items such as keys, mobile phones or other small objects securely and within easy reach with the Mechunik Mini Cargo Storage Net.
BMW Series Key Ring
Everyone needs a great keychain, and for BMW drivers, this is it. Keychain features your series number in the original font.
I have this bracket and love it. Is there going to be an update to accommodate the bigger size of the iphone 6 (and plus).
Yes, we will release a device holder that is compatible with the bracket you have currently, shortly. At the moment however we do not have an approximate release date for this item.
People are buying the new iPhones starting today, which are much bigger than past iPhones. Are you in the process of making new holders for the 6 and/or 6+?
Yes, the Mobile dash mount --a new device holder will be introduced to accommodate the iphone 6/6+'s larger dimensions-- Be on the look out for this product's arrival shortly.
Hello I have a Samsung Galaxy S5 it says the dimensions are 5.59” (H) x 2.85” (W) x 0.31” (D) inches. I'm concerned it won't fit based on the width. Can you confirm?
This unit was not designed with the Samsung S4 or S5 in mind. It will not fit your correctly.
I would like to order the white device holder for my 2007 328xi Coupe. It appears that it's $35.00, but my question is that for everything I need? If not please inform me what I need for complete instalation process. Thank you.
Selecting the option that states "White Device Holder and Vehicle Bracket" will include everything you require for your application.
Will the MDM fit a galaxy note 3?
This will not fit the Note II/III or the Galaxy S III/IV super phones. We are currently working on a device holder for these wider phones.
Will the phone bracket work with an iphone 4 with no case?
The phone holder bracket is adjustable so it will fit the iPhone, with or without a case. It will not fit phones that are wider than 2.5\" wide.
Can you make the same bracket for a right hand drive vehicle?
Unfortunately, we do not have these for right hand drive (RHD) vehicles. It would require a different mold completely, and we do not have enough demand to invest in the tooling to make these, sorry.
- PDF Install Guide for Mobile Dash Mount for BMW 3 Series Sedan and M3 - 2012 and up
- PDF Install Guide for Mobile Dash Mount for BMW 4 Series Coupe and M4 - 2013 and up
- PDF Install Guide for Mobile Dash Mount for BMW 3 Series and M3 - 1992-98
- PDF Install Guide for Mobile Dash Mount for BMW 7 Series - 1995-02
- PDF Install Guide for Mobile Dash Mount for BMW 5 Series and M5 - 1997-03
- PDF Install Guide for Mobile Dash Mount for BMW 3 Series Coupe, Sedan, Convertible and M3 - 1999-2006
- PDF Install Guide for Mobile Dash Mount for BMW 5 Series and M5 - 2004-2009
- PDF Install Guide for Mobile Dash Mount - For LHD 8P A3 - 2006-2007
- PDF Install Guide for Mobile Dash Mount for BMW 3 Series Sedan and M3 - 2006-2012
- PDF Install Guide for Mobile Dash Mount for BMW 3 Series Sedan and M3 - 2006-2012
- PDF Install Guide for Mobile Dash Mount for BMW 3 Series 2006-2012 E90 Sedan, E91 Touring, E92 Coupe and E93 Cabrio
- PDF Install Guide for Mobile Dash Mount for
- PDF Install Guide for Mobile Dash Mount for BMW X3 SAV - 2003-2010
- PDF Install Guide for Mobile Dash Mount for BMW X5 SAV - 2000-2006
- PDF Install Guide for Mobile Dash Mount for BMW Z3 Roadster and MZ3 - 1997-02
Prices& OrderingBMW VEHICLE SPECIFIC MOUNTING BRACKET** Required to mount plate for holder. Not required if you have existing compatible bracket. Plate & Device holder sold separately below.ALUMINUM MOUNTING PLATE WITH 13MM BALL** Required to mount one of our 2 device holders. Mounts to our bracket or existing compatible bracket you may already own.STURDY DEVICE HOLDER (WITH WINGS)Mounts to Aluminum Mounting Plate. For devices 3.5-5.3 inches wide. Aluminum Mounting Plate sold separately above.SLIM DEVICE HOLDER (LOW PROFILE)Mounts to Aluminum Mounting Plate. For devices 3.5-5.3 inches wide. Aluminum Mounting Plate sold separately above.DEVICE TILT ANGLE ADAPTORMounts between Vehicle Bracket & Aluminum Mounting Plate for added flexibility (sold separately above)6 INCH DESKTOP FLEXIBLE TRIPODUse one of our 2 holders to create a desktop viewing solution in your office, kitchen or workshop. Device Holders sold separately above.
add_shopping_cartAdd To Cart